Tech Blog

Unimax Firmware Release

Wednesday, 14 October 2015 02:26
Written by 
Rate this item
(0 votes)

PRODUCT: UNIMAX+

PRODUCT CODE: MA-2025 & MA-2025-4G

RELEASE VERSION: 5.5.33

RELEASE DATE: SEPTEMBER 2015

From 5.5.10 to 5.5.33

  • Ping checking interval added
  • Dynamic DNS web page changed
  • Dyndns configuration by SMS
  • MTU size of L2TP/IPsec changed from 1400 to 1200
  • Removed SNMPv3 option in SNMP webpage
  • New Partition for backing up NV and restoring
  • Static Route added in the webpage
  • AT over IP function added
  • Data Limitation function added under WAN Page
  • DOS Filters added
  • Port forwarding entry extended up to 20 entries
  • New feature for Static Route added to communicate in both directions when L2TP/IPsec VPN is used
  • Increased maximum data limit from 10 MB to 10 TB
  • Bug fixes related to factory reset, SMS remote commands, NVRAM save, L2TP over IPsec, Static Route, Data Limitation with save and reboot, MAC filtering, WAN Scheduler, maXconnect, EM770W SMS return, IPsec FQDN, UDP high data transfer, Inbound IP filter 

From 5.5.10 to 5.5.33

  • Added Gateway to Gateway IPsec tunnel
  • LAN or WAN Ping check feature added
  • Improved speed to establish a WAN connection
  • Custom Script support added in PPP VPN client
  • DDoS value set to disabled by default
  • Feature added to restart via reset button & modify factory reset function
  • Added option for modem not to reboot when there is poor signal and no network connection
  • Ping check interval maximum value set to 86400
  • Bug fixes related to IPsec VPN, SIM busy and MC7304 WAN username and password, subnet mask in MC7304, client key for Dyndns update, ping check when NAT turned off, Active FTP connect, maXconnect update such as Network band, Area information etc, IO change via SMS, Data reset when WAN disconnect by Scheduler, VPN when NAT turned off

Extra Information:

  • Firmware prior to 5.4.26 is not compatible to Unimax+ 4G hardware.
  • Please contact Maxon before upgrading from firmware prior to 5.4.12. 



Read 3852 times Last modified on Wednesday, 14 October 2015 02:30
 

Leave a comment

Make sure you enter the (*) required information where indicated.